We have own design team, we can design the machine as customer required.our engineer have more 20 years experience.
English
 |
Steel Roofing Metal Water Rain Gutter Forming Making Machine
Material Type | Pre-painted steel coil & galvanized coils |
Thickness | 0.3-0.8mm |
Yield strength | 235Mpa.Q345Mpa, Q550Mpa |
Roller material | Quenched and tempered treatment, hard chrome coated.05-0.07mm |
Forming speed | About 15-20m/min |
Speed adjusting mode | AC Frequency |
Roller drive | Decelerating motor + Chain drive |
Cutting mode | Hydraulic cutting |
Cutter material | Cr12 mould steel |
Length measurement | Encoder |
Control mode | Panasonic or Delta PLC |
Main motor | 5.5KW |
Hydraulic station motor | 4KW |
Feeding Part:
1)Positioning plate: adjust the position of both ends to make it fit the width of the feed.
2)Guide frame: play a role in supporting the transport of the material roll.
3)Guide roller: The upper and lower round rollers are designed to make the feeding process more smooth.
Roller Assembly: | ||
1 | Main roller diameter | 70mm |
2 | Roller material | 45 # steel,Heat treatment, hard chrome plating after finish turning, mirror polishing |
3 | Frame tie rod | 20 # electroplate round steel to increase rigidity on both sides of wall panel |
4 | Roll forming | Roll forming process of coil |
Cutting After Forming: | ||
1 | Guide mechanism | make the knife holder cut smoothly without deformation of the cut. |
2 | Cast iron tool holder | obvious shock absorption effect and strong impact resistance |
3 | Blade material | Cr12Mov The cutting life exceeds 1 million times |
4 | Rear scissor frame | Q235 steel plate, annealing treatment after rough turning, finishing. |
PLC control cabinet
1)P L C: Adopt DELTA high-precision PLC electronic device.
2)Inverter: DELTA heavy-duty inverter, running efficiently and stably.
3)Control components: DELTA Electronics, with long service life and low failure rate.
4)Touch screen control: input production data and automatically complete production requirements.
Product Features
1. More efficient and accurate execution of production orders;
2. High equipment reliability;
3. Little waste of materials and energy;
4. High productivity;
5. High quality materials, get a longer service life;
6. All parts of the machine are processed with precision, and the surface of the roll is chromeplated to ensure that customers can get qualified products at the same time, it can avoid the scratch of the color steel surface paint, and increase the service life of the roll;
7. Customized coil processing solutions to solve all aspects of technical problems.
Steel Roofing Metal Water Rain Gutter Forming Making Machine
Material Type | Pre-painted steel coil & galvanized coils |
Thickness | 0.3-0.8mm |
Yield strength | 235Mpa.Q345Mpa, Q550Mpa |
Roller material | Quenched and tempered treatment, hard chrome coated.05-0.07mm |
Forming speed | About 15-20m/min |
Speed adjusting mode | AC Frequency |
Roller drive | Decelerating motor + Chain drive |
Cutting mode | Hydraulic cutting |
Cutter material | Cr12 mould steel |
Length measurement | Encoder |
Control mode | Panasonic or Delta PLC |
Main motor | 5.5KW |
Hydraulic station motor | 4KW |
Feeding Part:
1)Positioning plate: adjust the position of both ends to make it fit the width of the feed.
2)Guide frame: play a role in supporting the transport of the material roll.
3)Guide roller: The upper and lower round rollers are designed to make the feeding process more smooth.
Roller Assembly: | ||
1 | Main roller diameter | 70mm |
2 | Roller material | 45 # steel,Heat treatment, hard chrome plating after finish turning, mirror polishing |
3 | Frame tie rod | 20 # electroplate round steel to increase rigidity on both sides of wall panel |
4 | Roll forming | Roll forming process of coil |
Cutting After Forming: | ||
1 | Guide mechanism | make the knife holder cut smoothly without deformation of the cut. |
2 | Cast iron tool holder | obvious shock absorption effect and strong impact resistance |
3 | Blade material | Cr12Mov The cutting life exceeds 1 million times |
4 | Rear scissor frame | Q235 steel plate, annealing treatment after rough turning, finishing. |
PLC control cabinet
1)P L C: Adopt DELTA high-precision PLC electronic device.
2)Inverter: DELTA heavy-duty inverter, running efficiently and stably.
3)Control components: DELTA Electronics, with long service life and low failure rate.
4)Touch screen control: input production data and automatically complete production requirements.
Product Features
1. More efficient and accurate execution of production orders;
2. High equipment reliability;
3. Little waste of materials and energy;
4. High productivity;
5. High quality materials, get a longer service life;
6. All parts of the machine are processed with precision, and the surface of the roll is chromeplated to ensure that customers can get qualified products at the same time, it can avoid the scratch of the color steel surface paint, and increase the service life of the roll;
7. Customized coil processing solutions to solve all aspects of technical problems.
Add:1711 Room, Building 2, Jinggui
Centre, Yunhe Zone, Cangzhou City,
Hebei Province,China
